Panasonic KX-NCP500, Features Manual

Page: 116 / 468

•
If none of an extension’s PDN buttons are idle, DSS buttons of other extensions registered to the PDN
extension will turn on red.
•
Ring Tone Pattern
Through system programming, each extension can set ring tone patterns for PDN buttons. Ring tone
patterns can be assigned separately for each SDN button.
•
Outgoing Line Preference
When "PDN" is selected as the outgoing line preference, outgoing calls will originate on the first available
PDN button (
®
1.5.5.2 Line Preference—Outgoing).
•
Incoming Line Preference
Through system programming, it is possible for only incoming calls arriving at PDN buttons to be answered
simply by going off-hook, by selecting "PDN" as the incoming line preference (
®
1.4.1.2 Line Preference
—Incoming). This prohibits calls that arrive on non-PDN buttons (e.g., an SDN button) to be answered
when going off-hook.
•
Walking Extension
For PDN extensions, the Walking Extension feature can only be used when all PDN buttons are idle
(
®
1.28.3 Walking Extension Features).
•
Wireless XDP Parallel Mode
If a PS has PDN or SDN buttons, Wireless XDP Parallel mode cannot be assigned to that PS (
®
1.25.5 Wireless XDP Parallel Mode).
•
OHCA/Whisper OHCA
A PDN extension cannot receive OHCA or Whisper OHCA, unless the call is made using a corresponding
SDN button (
®
1.8.4.3 Off-hook Call Announcement (OHCA),
®
1.8.4.4 Whisper OHCA).
•
Alternate Calling—Ring/Voice
It is not possible to temporarily change the called party’s preset call receiving method (ring tone or voice)
when calling a PDN extension, unless the call is made using a corresponding SDN button (
®
1.5.3 Intercom Call).
[Delayed Ringing]
•
The same delayed ringing setting is applied to all PDN buttons on an extension. Delayed ringing can be
assigned separately for each SDN button.
•
Through system programming, it is possible to select whether caller information (such as Caller ID) is
shown immediately on a PS when a call is received while delayed ringing is set.
•
Caller information (such as Caller ID) is not shown immediately on a PT when a call is received while
delayed ringing is set.
•
SDN buttons can be set to not ring (only flash) for incoming calls. However, this setting is not available for
PDN buttons.
•
The forward no answer timer starts when a PDN extension starts ringing.
PC Programming Manual References
4.12 [2-7-1] Class of Service—COS Settings—PDN/SDN
4.17 [2-8-3] Ring Tone Patterns—Call from Others—
Extension—Ring Tone Pattern Plan 1–8
4.18 [2-9] System Options—Option 4— System Wireless—SDN Delayed Ringing with LCD
6.1 [4-1-1] Wired Extension—Extension Settings—Option 9— PDN Delayed Ringing
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for SDN)
→ Extension Number (for SDN)
→ Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, Group CO, ICD Group,
SDN)
6.10 [4-2-1] Portable Station—Extension Settings—Option 9— PDN Delayed Ringing
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
116 Feature Guide
1.7.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension