Panasonic KX-NCP500, Features Manual

Page: 230 / 468

1.20.2 Flexible Buttons
Description
You can customise the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs through either system or personal programming. They can then be used to make or receive
intercom or trunk calls or be used as feature buttons, as follows:
[Button Usage]
Button Usage
Single-CO (S-CO) Used to access a specified trunk for making or receiving calls.
Group-CO (G-CO) Used to access an idle trunk in a specified trunk group for making
calls. Incoming calls from trunks in the assigned trunk group arrive
at this button.
Loop-CO (L-CO) Used to access an idle trunk for making calls. Incoming calls from
any trunk arrive at this button.
Direct Station Selection (DSS) Used to access an extension with one touch.
Network Direct Station Selection
(NDSS) Used to access an extension at another PBX within the same
network.
One-touch Dialling Used to access a preprogrammed party or feature with one touch.
Incoming Call Distribution (ICD)
Group Used to access a specified incoming call distribution group for
making or receiving calls.
Message Used to leave a message waiting indication or call back the party
who left the message waiting indication.
FWD/DND (External/Internal/
Both)
*1
Used to perform the FWD or DND feature for the extension. The
feature is applied to trunk calls, intercom calls, or both.
Group FWD (External/Internal/
Both) Used to perform the FWD feature for a specified incoming call
distribution group. The feature is applied to trunk calls, intercom
calls, or both.
Account Code Entry (Account) Used to enter an account code.
Conference Used to establish a multiparty conversation.
Terminate Used to disconnect the current call and make another call without
hanging up.
External Feature Access (EFA) Used to send a flash/recall signal to the telephone company or host
PBX to access their features.
Charge Reference Used to check the total call charge for your own extension.
Call Park Used to park or retrieve a call in a preset PBX parking zone.
Call Park (Automatic Park Zone) Used to park a call in an idle PBX parking zone automatically.
Call Log Used to show the incoming call information.
Log-in/Log-out
*1
Used to switch between log-in and log-out mode.
Hurry-up Used to redirect the longest waiting call in the queue of an incoming
call distribution group to the overflow destination.
230 Feature Guide
1.20.2 Flexible Buttons