8.
a.
Under
Do not use proxy server for addresses
beginning with:
, type the IP address of the LAN
port of the card.
b.
Click
OK
.
Your PC is now ready for programming the
KX-HGT100 through an IP network.
Programming the KX-HGT100
1.
Start Internet Explorer from the
Start
menu.
2.
a.
Enter the IP address of the KX-HGT100 in the address box.
b.
Press the Enter key.
3.
The log-in screen will appear.
a.
In the
User name
box, type the user name (default:
KX-HGT100
).
b.
In the
Password
box, type the password (default:
kx-hgt100
).
c.
Click
OK
.
4.
The top page will appear.
a.
Click
Basic Setting
.
b.
In the
Telephone Number
and
SIP ID
boxes, type
the extension number.
c.
In the
SIP Password
box, type the password.
d.
In the
Proxy Address
,
Registrar Address
, and
SIP Domain
boxes, type the IP address of the
MPR card.
e.
Click
Save
.
f.
Click
Return to top page
.
Note
For information on other parameters, refer to
Parameter Descriptions.
5.
a.
Click
Restart
.
b.
Click
Restart now
for changes to take effect. The
KX-HGT100 will be restarted.
If the authentication information of the
KX-HGT100 and the PBX match, the registration
is successful.
Note
To access Web Programming after restarting the KX-HGT100, it is necessary to (1) turn the KX-HGT100
power off, and (2) hold the OK and MUTE buttons while turning the power on.
Document Version 2010-08
IP Networking Guide
95
4.6.1 Registering IP Telephones
Summary of Contents for KX-NCP500
