KX-NT321
IP Address*
1
Subnet Mask Address*
2
Default Gateway Address*
3
To set the IP address of the IP-PT
To set the subnet mask address
To set the default gateway address (if required)
To start programming
Supply power to the IP-PT.
Press PROGRAM
while "Searching" is displayed.
Select "Network".
Press SP-PHONE.
Select "DHCP (Disable)".
Press SP-PHONE
twice.
Press SP-PHONE.
Select "Subnet Mask".
Press SP-PHONE.
Press SP-PHONE.
Select "Default GW".
Press SP-PHONE.
Press SP-PHONE.
Press HOLD to return
to the Menu screen.
To enter the IP address of the Secondary PBX (if required)
Select "PBX IP
Address".
Press SP-PHONE.
Select "PBX".
Press SP-PHONE.
Select "Secondary
PBX".
Press SP-PHONE.
Press SP-PHONE.
PBX IP Address
Press HOLD twice to return
to the Menu screen.
Continued on next page
Document Version 2010-08
IP Networking Guide
57
4.5.1 Assigning the IP Addressing Information
Summary of Contents for KX-NCP500
