Panasonic KX-NCP500, Networking Manual

Page: 48 / 110

When not using a DHCP server:
a.
Select Disable for the DHCP Client setting.
b.
For KX-NCP500/KX-NCP1000/KX-TDE100/
KX-TDE200, type the IP address of the MPR card
in the
IP Address for IPCMPR Card box. For
KX-TDE600, type the IP address of the MPR card
in the
IP Address for IPCEMPR Card box.
*1
c.
In the IP Address for VoIP-DSP box, type the IP
address of the DSP card.
*2
d.
In the Subnet Mask box, type the subnet mask
address of the network.
*3
e.
In the Default Gateway box, type the IP address
of the default gateway.
*4
f.
Click Apply .
8. Follow the instructions of the Quick Setup wizard in Quick Setup.
After Quick Setup is completed, if the IP addressing information was not changed and a V-IPEXT card
was installed during setup, the IP-PT registration screen is displayed. For information on registering
IP-PTs to the PBX, refer to "Registration of IP-PTs" in "4.6.1 Registering IP Telephones".
Programming from the system menu
1. The IP addressing information for the MPR card can
also be assigned from the system menu.
a.
Under Configuration , click Slot .
b.
Move the mouse pointer over the MPR card. A
menu will be shown under the mouse pointer.
c.
Click Card Property .
2. When using a DHCP server:
a.
Click the LAN Setting tab, then select Enable for
the DHCP Client setting.
b.
Click Apply .
48 IP Networking Guide Document Version 2010-08
4.3.1 Assigning the IP Addressing Information