Panasonic KX-NCP500, Networking Manual

Page: 44 / 110

7. a.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
b.
Click INS .
*1 When "En-bloc" is selected, you need to press "#" after dialing the phone number.
Programming for the Extension Number Method
1. a.
Under Configuration , click Slot .
b.
Move the mouse pointer over the small PBX image
for virtual slots.
c.
Click Select Shelf .
d.
Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
e.
Click Port Property .
Confirm that all ports are in service ( INS ).
Note
When a V-IPGW16 card is installed, 8 ports (1–8)
are available. When two V-IPGW16 cards are
installed, 16 ports (1–16) are available.
2. a.
From the system menu, click CO & Incoming Call .
b.
Click CO Line Settings .
c.
Type the CO Name and assign an unused Trunk
Group Number to be used for all IP CO lines.
d.
Click OK .
44 IP Networking Guide Document Version 2010-08
4.2.3 Programming the Network Settings