KX-NT321
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
To enter the IP address of the MPR card in the Primary PBX (PBX IP Address)
To the VLAN settings
To end programming
To set VLAN parameters
OR
Press HOLD twice to return
to the Menu screen.
Select "PBX IP
Address".
Press SP-PHONE.
Press SP-PHONE.
Press STORE.
Select "PBX".
Press SP-PHONE.
Press SP-PHONE.
Select "Primary
PBX".
Press SP-PHONE.
Select "Secondary
PBX".
Press SP-PHONE.
To enter the IP address of the Secondary PBX (if required)
PBX IP Address
PBX IP Address
The IP-PT will reboot
and can then be
registered to the PBX.
Note
To confirm the connection to the secondary PBX after programming, (1) turn the IP-PT’s power off,
and (2) hold the STORE button and 2 key while turning the power on.
Document Version 2010-08
IP Networking Guide
53
4.5.1 Assigning the IP Addressing Information
Summary of Contents for KX-NCP500
