background image

6. Fax

44

6 Fax

Sending Faxes

6.1 Sending a fax manually

Important:

L

You can only send faxes in monochrome.

6.1.1 Using the scanner glass

By using the scanner glass, you can send a page from 
booklets or small size paper that cannot be sent with the 
automatic document feeder.

1

If the 

{

Fax

}

 light is OFF, turn it ON by pressing 

{

Fax

}

.

2

Set the original (page 20).

3

If necessary, change the resolution and contrast 
according to the type of document.

L

To select the resolution, see page 44.

L

To select the contrast, see page 44.

4

Dial the fax number.

L

To send a single page, skip to step 7.

L

To send multiple pages, go to the next step.

5

Press 

{

Quick Scan

}

 to scan the document into 

memory.

L

Wait until 

SCAN:PRESS SET

 

SEND:PRESS 

START

 is displayed.

6

Place the next page on the scanner glass. 

i

 

{

Set

}

L

To send more pages, repeat this step.

7

{

Black

}

Note:

L

To stop sending, see page 77.

L

You can change the default operation mode (feature 
#463 on page 60) and the timer before returning to 
the default operation mode (feature #464 on page 
60
).

To select the resolution

1.

Press 

{

Resolution

}

 repeatedly.

STANDARD

: For normal-sized characters.

FINE

: For small-sized characters.

SUPER FINE

: For very small-sized characters.

PHOTO

: For photographs, shaded drawings, 

etc.

2.

{

Set

}

L

Using the 

FINE

SUPER FINE

 and 

PHOTO

 

settings will increase transmission time.

To select the contrast

You can adjust this setting depending on the darkness or 
lightness of the document. 5 levels (low to high) are 
available.
Press 

{

Contrast

}

 repeatedly. 

i

 

{

Set

}

Note:

L

You can hold the previous contrast setting (feature 
#462 on page 59).

To redial the last number

{

Redial

}

L

If the line is busy, the unit will automatically redial the 
number up to 5 times.

Note:

L

To stop sending, see page 77.

Reserving the fax transmission (Dual Access)

You can reserve the fax transmission even when the unit 
is just receiving a fax or sending a fax from memory.

Up to 3 reservations when sending

Up to 4 reservations when receiving

1.

Set the original during fax reception or fax memory 
transmission.

2.

Enter the fax number using the dial keypad, one-
touch dial or navigator directory.

3. When using the scanner glass,

 press 

{

Quick 

Scan

}

. The unit will scan 1 page. Place the next 

document on the scanner glass and press 

{

Set

}

Repeat this until all the documents are scanned, then 
press 

{

Black

}

.

When using the automatic document feeder,

 

press 

{

Black

}

.

L

If the document exceeds the memory capacity, 
transmission will be cancelled. You must send the 
entire document manually.

Printing a sending report

A sending report provides you with a printed record of 
transmission results. To print sending reports, make sure 
feature #401 is activated (page 61). For an explanation 
of error messages, see page 80.

Printing a journal report

A journal report provides you with a printed record of the 
30 most recent faxes. To print it manually, see page 102. 
To print it automatically after every 30 new fax 
transmissions and receptions, make sure feature #402 is 

{

Black

}

{

Set

}

{

Fax

}

{

Contrast

}

{

Resolution

}

{

Quick Scan

}

{

Redial

}

Summary of Contents for KX-MC6020E

























































































































Reviews: