Panasonic KX-MC6020E, Operating Instructions Manual

Page: 59 / 120

8. Programmable Features
59
Changing the ring count in
FAX ONLY mode
{#}{
2
}{
1
}{
0
}
{
1
}
“
1
”
{
2
}
“
2
” (default)
{
3
}
“
3
”
{
4
}
“
4
”
{
5
}
“
5
”
{
6
}
“
6
”
{
7
}
“
7
”
{
8
}
“
8
”
{
9
}
“
9
”
L
If you are using the unit with an answering machine, set to more than 4
(page 52).
Setting the Caller ID list to
print automatically
{#}{
2
}{
1
}{
6
}
{
0
}
“
OFF
” (default): The unit will not print the Caller ID list, but will keep records
of the information for the last 30 callers.
{
1
}
“
ON
” : The unit will print the Caller ID list automatically after every 30 new
calls (page 55).
Setting the recording paper
size in the standard input tray
{#}{
3
}{
8
}{
0
}
{
1
}
“
LETTER
” : Letter-size paper
{
2
}
“
A4
” (default): A4-size paper
{
3
}
“
LEGAL
” : Legal-size paper
Setting the recording paper
size in the optional input tray
{#}{
3
}{
8
}{
2
}
This feature will be displayed only when the optional input tray is installed.
{
1
}
“
LETTER
” : Letter-size paper
{
2
}
“
A4
” (default): A4-size paper
{
3
}
“
LEGAL
” : Legal-size paper
Setting the recording paper
type
{#}{
3
}{
8
}{
3
}
{
1
}
“
PLAIN PAPER
” (default): 75 g/m
2
to 105 g/m
2
paper.
{
2
}
“
THIN PAPER
” : 60 g/m
2
to 74 g/m
2
paper.
{
3
}
“
THICK PAPER
” : 106 g/m
2
to 165 g/m
2
paper.
Note:
L
This setting is valid for both the standard input tray and the optional input
tray.
L
“
THICK PAPER
” will be displayed only when “
#1
” is selected for the
following:
–
Paper input tray setting for fax (Feature #440 on page 63).
– Paper input tray setting for copy (Feature #460 on page 65).
– Paper input tray in PCL
®
(Feature #760 on page 66).
– Paper input tray setting for the scan to e-mail print feature (Feature #565
on page 72).
Setting the waiting time for
the power save mode
{#}{
4
}{
0
}{
3
}
To set the length of time before the unit enters the power save mode.
{
1
}
“
5min
” : 5 minutes
{
2
}
“
15min
” (default): 15 minutes
{
3
}
“
30min
” : 30 minutes
{
4
}
“
1h
” : 1 hour
Note:
L
During the power save mode, the unit needs to preheat the fuser unit before
printing.
Holding the previous contrast
setting
{#}{
4
}{
6
}{
2
}
{
0
}
“
DISABLED
” (default): Deactivates this feature.
{
1
}
“
ENABLED
” : The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying and sending faxes.
Feature/Code Selection