Panasonic KX-MC6020E, Operating Instructions Manual

Page: 60 / 120

8. Programmable Features
60
Setting the default operation
mode
{#}{
4
}{
6
}{
3
}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{
1
}
“
COPY
” (default): Copy mode is selected as default.
{
2
}
“
FAX
” : Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
Setting the default operation
mode timer
{#}{
4
}{
6
}{
4
}
To set the timer before returning to the default operation mode (feature #463).
{
0
}
“
OFF
” : Deactivates this feature.
{
1
}
“
30s
” : 30 seconds
{
2
}
“
1min
” (default): 1 minute
{
3
}
“
2min
” : 2 minutes
{ 4 } “
5min
” : 5 minutes
Cleaning the drum
{#}{
4
}{
8
}{
0
}
Clean the drum cartridge automatically. See page 102 for details.
Setting toner save feature
{#}{
4
}{
8
}{
2
}
{
0
}
“
OFF
” (default): Deactivates this feature.
{
1
}
“
ON
” : The toner cartridge will last longer.
Note:
L
This feature may lower the print quality by reducing toner consumption.
Changing the colour
calibration for all colours
(cyan, magenta, yellow and
black)
{#}{
4
}{
8
}{
5
}
Change the colour calibration if colour printing is too dark or too light. See page
77 for details.
Changing the colour
calibration for cyan colour
{#}{
4
}{
8
}{
6
}
Change the colour calibration if colour printing is too dark or too light. See page
77 for details.
Changing the colour
calibration for magenta
colour
{#}{
4
}{
8
}{
7
}
Change the colour calibration if colour printing is too dark or too light. See page
77 for details.
Changing the colour
calibration for yellow colour
{#}{
4
}{
8
}{
8
}
Change the colour calibration if colour printing is too dark or too light. See page
77 for details.
Changing the colour
calibration for black colour
{#}{
4
}{
8
}{
9
}
Change the colour calibration if colour printing is too dark or too light. See page
77 for details.
Feature/Code Selection