Panasonic KX-MC6020E Operating Instructions Manual Download Page 16

Page: 16 / 120

1. Introduction and Installation

Load the paper, print-side up (

Important:

Push and lock the plate (

) in the standard

input tray, if it is lifted.

Pinch the right side of the recording paper guide
(

), then slide it to match the paper size mark.

Pinch the front and back recording paper guides (

)

at the same time, then slide them together to match
the paper size mark.

Make sure that the recording paper guides (

)

are at the paper size mark and the recording

paper is under the paper limit mark (

). The

paper should not be loaded over the tab (

Insert the standard input tray to the unit, lifting the
front part of the tray. Then push it completely into the
unit.

Note:

If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.

If the standard input tray does not close, the plate in
the standard input tray may be lifted. Push the paper
and make sure that the paper is laid flat in the
standard input tray.

Summary of Contents for KX-MC6020E

























































































































Search results

Summary of Contents for KX-MC6020E

Reviews:

Related manuals for KX-MC6020E

Brands by name

Popular brands

Panasonic KX-MC6020E, Operating Instructions Manual

Search results

Summary of Contents for KX-MC6020E

Reviews:

Related manuals for KX-MC6020E

Brands by name

Popular brands