Panasonic KX-FLB801E Operating Instructions Manual Download Page 84

Page: 84 / 98

8. Help

When the document has jammed near the
document exit:

Press the ADF cover release button (

) and

open the middle part (

) of the ADF cover.

Remove the jammed document (

)

carefully.

Close the ADF cover.

Cleaning

8.7 Cleaning the white
plate and glasses

Clean the white plate and glasses when a black
line, a white line or a dirty pattern appears on:
–

your recording paper,

–

the original document,

–

the data scanned by the computer, or

–

the fax document received by the other party.

Caution:

Be careful when handling the drum and
toner unit. See the caution for the drum
unit on page 75 for details.

Do not use paper products, such as paper
towels or tissues, to clean the inside of
the unit.

8.7.1 White plate and scanner
glasses

Disconnect the mains lead.

Open the document cover (

FLB801E-PFQX2483ZA-en.book Page 82 Friday, March 31, 2006 6:40 PM

Summary of Contents for KX-FLB801E



































































































Search results

Summary of Contents for KX-FLB801E

Reviews:

Related manuals for KX-FLB801E

Brands by name

Popular brands

Panasonic KX-FLB801E, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB801E

Reviews:

Related manuals for KX-FLB801E

Brands by name

Popular brands