Panasonic KX-FLB801E Operating Instructions Manual Download Page 88

Page: 88 / 98

8. Help

8.8 Cleaning the
document feeder rollers

Clean the rollers when the document or
recording paper frequently misfeeds.

Disconnect the mains lead.

Hold the ADF cover firmly and lift it to open
the upper part (

) of the ADF cover.

Press the ADF cover release button (

) and

open the middle part (

) of the ADF cover.

Clean the document feeder rollers (

) with a

cloth moistened with isopropyl rubbing
alcohol, and let all parts dry thoroughly.

Clean the rollers in the direction of the
arrow to avoid the discharge brush (

)

from being pulled.

Close the ADF cover.

Re-connect the mains lead.

FLB801E-PFQX2483ZA-en.book Page 86 Friday, March 31, 2006 6:40 PM

Summary of Contents for KX-FLB801E



































































































Search results

Summary of Contents for KX-FLB801E

Reviews:

Related manuals for KX-FLB801E

Brands by name

Popular brands

Panasonic KX-FLB801E, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB801E

Reviews:

Related manuals for KX-FLB801E

Brands by name

Popular brands