Panasonic KX-FLB801E Operating Instructions Manual Download Page 24

Page: 24 / 98

2. Preparation

2 Preparation

Connections and Setup

2.1 Connections

Plug in the mains lead and the telephone line
cord. (Switch on AC mains outlet.)

Caution:

The mains lead must remain connected at
all times.

Never install telephone wiring during a
lightning storm.

When you operate this product, the power
outlet should be near the product and
easily accessible.

Be sure to use the telephone line cord
included in this unit.

Do not extend the telephone line cord.

Note:

To avoid malfunction, do not position the unit
near appliances such as TVs or speakers
which generate an intense magnetic field.

If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.

If you use the unit with a computer and your
internet provider instructs you to install a filter
(

), please connect it as follows.

Using the optional handset unit

You can add the optional handset unit

(Model

No. KX-FA103X)

. See page 12 for accessory

information.

Connect to the handset unit connection
socket (

) before use. For more details,

please refer to the installation guide for the
optional handset unit.

Telephone line cord

Connect to telephone network.

Mains lead

Connect to Household Mains Supply
(220 – 240 V, 50 Hz).

[

EXT

]

socket

You can connect an answering machine
or an extension telephone. Remove the
stopper if attached.

Answering machine (not included)

Handset unit (Optional) connection socket

You can connect the optional handset
unit. Remove the seal if attached.

Extension telephone
adaptor (not included)

FLB801E-PFQX2483ZA-en.book Page 22 Friday, March 31, 2006 6:40 PM

Summary of Contents for KX-FLB801E



































































































Search results

Summary of Contents for KX-FLB801E

Reviews:

Related manuals for KX-FLB801E

Brands by name

Popular brands

Panasonic KX-FLB801E, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB801E

Reviews:

Related manuals for KX-FLB801E

Brands by name

Popular brands