background image

7. Programmable Features

61

Sending a fax at a specific 
time

{#}{

4

}{

1

}{

2

}

This feature allows you to take advantage of low-cost calling hours 
offered by your telephone company. This feature can be set up to 24 
hours in advance of the desired time.

{

0

}

 

OFF

 (default)

{

1

}

 

ON

To send a document:

1.

If the 

{

FAX

}

 light is OFF, turn it ON by pressing 

{

FAX

}

.

2.

Insert the document into the auto document feeder.

3.

If necessary, change to the desired resolution (page 28) and the 
desired contrast (page 28).

4.

Press 

{

MENU

}

.

5.

Press 

{#}

, then 

{

4

}{

1

}{

2

}

.

6.

Press 

{

1

}

 to select 

ON

.

7.

Press 

{

SET

}

.

8.

Enter the fax number.

L

To enter an item using one-touch dial feature and navigator 
directory, see step 4 on page 33. (When using navigator 
directory, you do not have to press 

{

DIRECTORY

}

 before 

pressing 

{V}

 or 

{^}

.)

9.

Press 

{

SET

}

.

10.

Enter the transmission start time.

L

Press 

{*}

 repeatedly to select 

AM

 or 

PM

.

11.

Press 

{

SET

}

.

L

The document will be fed into the unit and scanned into 
memory. The unit will then send the data at the specified time.

Note:

L

To cancel after programming, press 

{

STOP

}

 then 

{

SET

}

.

L

You can also send a document using the scanner glass. Press 

{

SET

}

 in step 11, then press 

{

START

}

.

Setting the Error 
Correction Mode (ECM)

{#}{

4

}{

1

}{

3

}

This feature is available when the sending / receiving fax machines are 
ECM compatible.

{

0

}

 

OFF

: Deactivates this feature.

{

1

}

 

ON

 (default): If there is an error during fax transmission / 

reception, the unit will support the communication.

Setting the connecting 
tone

{#}{

4

}{

1

}{

6

}

If you often have trouble when sending faxes, this feature allows you to 
hear connecting tones: fax tone, ring back tone and busy tone. You 
can use these tones to confirm the status of the other party’s machine.

{

0

}

 

OFF

: Deactivates this feature.

{

1

}

 

ON

 (default): You will hear connecting tones.

Note:

L

If the ring back tone continues, the other party’s machine may not 
be a fax machine or may have run out of paper. Check with the 
other party.

L

The connecting tone volume cannot be adjusted.

Receiving other size 
documents

{#}{

4

}{

3

}{

2

}

To receive a fax document that is longer than your recording paper.

{

0

}

 

OFF

: The unit will print the original size.

{

1

}

 

ON

 (default): The unit will fit received documents onto your 

recording paper.

Feature/Code

Selection

FLB801E-PFQX2483ZA-en.book  Page 61  Friday, March 31, 2006  6:40 PM

Summary of Contents for KX-FLB801E



































































































Reviews: