Panasonic KX-FLB801E Operating Instructions Manual Download Page 83

Page: 83 / 98

8. Help

8.5.3 When the recording paper
in the manual input tray is not fed
into the unit properly

The display will show the following.

CHECK PICK UP

INPUT TRAY #2

Remove the recording paper.

Re-insert the recording paper.

Note:

If the error message is still displayed, check
the recording paper specifications and re-
install recording paper. See page 20 for
details.

8.6 Document jams (Auto
document feeder)

Caution:

Do not pull out the jammed document
forcibly before lifting the ADF cover.

Hold the ADF cover firmly and lift it to open
the upper part (

) of the ADF cover.

When the document has jammed near the
document entrance:

Remove the jammed document (

)

carefully.

FLB801E-PFQX2483ZA-en.book Page 81 Friday, March 31, 2006 6:40 PM

Summary of Contents for KX-FLB801E



































































































Search results

Summary of Contents for KX-FLB801E

Reviews:

Related manuals for KX-FLB801E

Brands by name

Popular brands

Panasonic KX-FLB801E, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB801E

Reviews:

Related manuals for KX-FLB801E

Brands by name

Popular brands