Panasonic KX-FLB801E Operating Instructions Manual Download Page 55

Page: 55 / 98

6. Multi-Function Station software

Envelopes that use encapsulated types of
adhesive that do not require moistening but
rely on pressure to seal them

Scanning

6.5 Using the unit as a
scanner

Keep the front cover page open for button
locations.

6.5.1 Using Multi-Function
Viewer

Set the original.

Using the auto document feeder

Insert the document (up to 40 pages) FACE
UP into the feeder until a single beep is
heard.

Confirm that there are no documents on
the scanner glass.

Using the scanner glass

Place the document FACE DOWN on the
scanner glass, aligning the top left corner of
the document to the

mark on the unit.

Confirm that there are no documents in
the auto document feeder.

Start Multi-Function Station.

Select

[

Viewer(Scan)

]

L [

Multi-Function Viewer

]

will appear.

Click the

[

Scan

]

icon in the

[

Multi-Function

Viewer

]

window.

The

[

Panasonic KX-FLB801E

]

(default

name) dialogue box will appear.

If necessary, change the scanning settings
on your computer.

To preview the scanned image, click

[

Preview

]

. Only the first page will be

displayed. You can drag the frame to
specify the scanned area. If you change
the scan mode, brightness, or contrast
setting, click

[

Preview

]

to refresh the

scanned image. If you use the auto
document feeder, set the document again
before refreshing the scanned image.

If you select

[

B/W Graphic

]

for scan

mode, the resolution range will be from
150 to 600 dpi.

Click

[

Scan

]

If you preview the scanned image using
the auto document feeder in step 5, set
the document again and click

[

Scan

]

The scanned image will be displayed in
the

[

Multi-Function Viewer

]

window

after scanning.

Clasp

Transparent window

FLB801E-PFQX2483ZA-en.book Page 53 Friday, March 31, 2006 6:40 PM

Summary of Contents for KX-FLB801E



































































































Search results

Summary of Contents for KX-FLB801E

Reviews:

Related manuals for KX-FLB801E

Brands by name

Popular brands

Panasonic KX-FLB801E, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB801E

Reviews:

Related manuals for KX-FLB801E

Brands by name

Popular brands