![background image](http://html.mh-extra.com/html/panasonic/homehawk-kx-hnc800/homehawk-kx-hnc800_user-manual_269892042.webp)
6
When prompted, create a login password for the camera, and then tap
[Next]
.
7
When prompted, enter a name for the camera and mobile device, and then tap
[OK]
.
R
The camera name setting is used by your mobile device to identify the camera. This is useful when
you have multiple cameras.
R
The mobile device name setting is used to identify your mobile device. This is useful when
performing certain operations, such as deregistering.
8
When
[Congrats!]
is displayed, tap
[Explore HomeHawk]
.
R
A screen asking you to set the home position of geo-fencing ( “Automatic Mode Switching”,
Page 67) is displayed, tap
[Set Current pos as Home]
®
[OK]
.
R
The app’s home screen is displayed when initial setup is completed.
9
Reattach the rear cover.
Basic Setup
1
Enter the password for the wireless network and then tap
[Next]
.
2
Depending on the type of mobile device that you use, proceed as follows.
Android users:
Go to step 3.
iOS 11.0 and later users:
Tap
[Join]
.
iOS 10.x users:
Change your mobile device’s wireless network setting temporarily so that it connects to the camera
directly.
R
Open your mobile device’s
[Settings]
app, tap
[Wi-Fi]
, select “Pansonic_Camera”, enter
“12345678” as the password, and then tap
[Join]
.
Note:
R
Your mobile device starts searching for the camera.
R
When
[Linking]
is displayed, wait for up to about 3 minutes until the camera is connected to your
wireless network and mobile device.
3
Press the
SETUP
button on the camera for about 2 seconds until the camera beeps.
R
The camera’s LED indicator starts blinking in green.
4
When prompted, create a login password for the camera, and then tap
[Next]
.
5
When prompted, enter a name for the camera and mobile device, and then tap
[OK]
.
R
The camera name setting is used by your mobile device to identify the camera. This is useful when
you have multiple cameras.
R
The mobile device name setting is used to identify your mobile device. This is useful when
performing certain operations, such as deregistering.
6
When
[Congrats!]
is displayed, tap
[Explore HomeHawk]
.
R
A screen asking you to set the home position of geo-fencing ( “Automatic Mode Switching”,
Page 67) is displayed, tap
[Set Current pos as Home]
®
[OK]
.
R
The app’s home screen is displayed when initial setup is completed.
7
Reattach the rear cover.
Registering other mobile devices to the shelf camera
Confirm the following before you begin.
– Make sure you have installed the
[HomeHawk]
app on your mobile device
– Make sure your wireless router and the camera are turned on
– Make sure your mobile device is connected to your wireless router
– Make sure your mobile device can connect to the Internet
42
Using a shelf camera and floor camera
Summary of Contents for HomeHawk KX-HNC800
Page 1: ...User s Guide Text entity en_us Model No ...
Page 154: ...154 Notes ...
Page 155: ...155 Notes ...
Page 156: ...PNQP1406VA eng CC1803YK4039 ...