Panasonic HomeHawk KX-HNC800, User Manual

Page: 53 / 156

2
Tap [FLOOR Camera] .
3
Tap [Add New Camera] .
4
Follow the on-screen instructions, plug in the camera, and then tap [Next] .
R Wait about 1 minute for the camera to start up.
5
Follow the on-screen instructions and confirm the LED color on your camera.
– If the camera’s LED indicator lights in yellow, tap the yellow icon and proceed to step 6.
– If the camera’s LED indicator lights in a color other than yellow, tap the icon for that color and
follow the on-screen instructions.
6
Confirm that the wireless network name (SSID) of the wireless router that the camera will connect to
is displayed, and then tap
[Done] .
R If a different wireless network name is displayed, tap [Change the network] and follow the
on-screen instructions.
7
Determine if you will complete the initial setup using WPS or without using WPS (Basic Setup).
–
Set up using WPS:
Select [WPS] and proceed from WPS.
– Set up without using WPS:
Select [Basic Setup] and proceed from Basic Setup.
WPS
WPS is a function of wireless routers that is used to easily connect wireless devices to wireless
routers. A WPS button on a wireless router indicates that it has the WPS function.
WPS
1
Press and hold the WPS button on the wireless router until the router’s WPS LED indicator starts
blinking.
2
Tap [Next] .
3
Press the SETUP button on the camera for about 5 seconds until the camera beeps.
R The camera’s LED indicator starts blinking in yellow.
4
Tap [Next] .
R When [Linking] is displayed, wait for up to about 2 minutes until the camera is connected to your
wireless network and mobile device.
5
Press the SETUP button on the camera for about 2 seconds until the camera beeps.
R The camera’s LED indicator starts blinking in green.
6
When prompted, create a login password for the camera, and then tap [Next] .
53
Using a shelf camera and floor camera