Panasonic HomeHawk KX-HNC800, User Manual

Page: 82 / 156

3
Tap [FRONT DOOR Camera Kit ( + OUTDOOR Cameras )] , wait for a while, and then follow the
on-screen instructions.
R If the access point’s LED indicator lights in green, tap the green lit icon, and then go to step 4.
R If the access point’s LED indicator blinks in amber, tap the amber blinking icon, and then connect
the Ethernet cable between the access point and router. Next, follow the on-screen instructions,
wait for a while, and then check the color of the LED lights again.
R If the access point’s LED indicator blinks in green, tap the blinking green icon, check if DHCP
(Dynamic Host Configuration Protocol) is operating for the router (refer to the operating
instructions included with your router or contact your Internet service provider), and then tap
[OK] .
4
When prompted, press the SETUP button on the access point.
5
When prompted, set the password that will be used to log in to the access point and then tap [OK] .
6
When prompted, enter a name for the access point
*1
and for your mobile device and then tap [OK] .
R The access point name setting is used by your mobile device to identify the access point. This is
useful when you have multiple access points.
R The mobile device name setting is used by the access point and other system users to identify
your mobile device. This is useful when performing certain operations, such as deregistering.
7
Follow the on-screen instructions and tap [Next]
®
[OK] .
R The app’s home screen is displayed when initial setup is completed.
*1 A name can only be entered for the access point the first time initial setup is performed. See
“Changing the name of cameras”, Page 99 or information on how to change the name for the
access point.
Registering other mobile devices to the access point
In order to access the access point and its connected devices from a mobile device, you must first
register the mobile device to the access point. You can register up to 8 mobile devices to an access point.
Confirm the following before you begin.
– Make sure you have completed the initial setup procedure ( “Initial setup”, Page 81)
– Make sure your mobile device can connect to the Internet
– Make sure your wireless router and the access point are turned on
– Make sure your mobile device and the access point are connected to the same wireless router
1
Using the mobile device that you want to register, download the [HomeHawk] app and then start the
app.
82
Using a front door camera and outdoor camera