Panasonic HL-C1 Series, User Manual

Page: 135 / 170

CHAPTER 6 RS-232C CONTROL
6-25
6-3-22 System
Function Command Code
Save MMR
Initialize INT
Example
(1) Save setting content (internal memory) (shown with BCC omitted).
(2) Initialize setting content (shown with BCC omitted).
Command
Code
Function
Read Set
Setting
Code
Content
2 9,600 bps
3 19,200 bps
4 38,400 bps
Baud Rate RSA WSA
5 115,200 bps
0 7 bits
Data
Length
RSB WSB
1 8 bits
0 Even
1 Odd
Parity
Check
RSC WSC
2 None
Example
(1) Read the setting content (shown with BCC omitted).
When the baud rate is 115,200bps.
(2) Change the setting (shown with BCC omitted).
Set the parity check to "Even".
z
Supplementary Explanation
• If the communication specification setting such as the baud rate, parity check, or data
length must be changed, save the setting after the change, turn off controller power
temporarily, then turn it on again. Note that the setting is not changed if only the setting
command is changed.
% E E # M M R
CR
% $ M M R E E
CR
Send
Respond
% E E # I N T
CR
% $ I N T E E
CR
Command Code
E # % E
BCC
CR
% E # E
Command Code
Select Head
R
C
BCC
R
3
S
Command Code
Setting Code
Select Head
R
C
BCC
E # E % W
3 S
% E # E
R
C
S A R 3
Send
% E $ E R S A
R
C
5
Respond
%
E # E
W
R
C
S C 3 0
%
E $ E
W
R
C
S C