Panasonic HL-C1 Series, User Manual

Page: 59 / 170

CHAPTER 4 MEASUREMENT
7. Measure the thickness of the measurement object.
Move the measurement object or sensor
heads horizontally and measure the thickness
of the measurement object.
When measuring the difference in thickness
from the reference work piece, touch the
key on the measurement display screen in
step 6, move to the subscreen 1 level below,
then touch
and make a zero setting.
z Supplementary Explanation
• When deviation occurs in measurement value, based on the surface status of the
object, execute calibration, referencing page 5-37.
• Changing the sampling cycle (page 5-8), moving average count (page 5-20), and
digital filter (pages 5-21, 22), based on the speed of movement, displacement ratio,
and displacement contents of object substance ensure furthermore stabilized
measurement.
• When the setting is changed, save changed setting (page 5-42) before turning off
the power supply.
4-9
Measurement Display Screen