Panasonic GT01 User Manual Download Page 27

Page: 27 / 206

1-3

Saving various data with a SD memory card (Model equipped with SD memory card slot

）

Various data can be saved and read out with a SD memory card.

Power can be supplied to the 5 V DC type with only one communication cable.

The power is supplied from the TOOL port of a PLC, therefore, the wiring man-hours can be significantly
reduced.

Applicable models:

Panasonic FP series

Mitsubishi Electric Corporation FX
series

Three methods are available to switch the screen.
Switching by the instruction from PLC

The screens can be switched by writing to the

“basic communication area” from the PLC ladder program.

Switching with the touch-screen operation

The screens can be switched on the GT by using the

“function switching parts” provided in the parts

library of the GTWIN that has a function to switch the screens.

Switching automatically

The GT man unit has an

“Auto-paging” function in the configuration setting that automatically switches

the screen to a specified screen number when a certain period of time has elapsed. This function can be
used to switch screens automatically.

Summary of Contents for GT01















































































































































































































Search results

Summary of Contents for GT01

Reviews:

Panasonic GT01, User Manual, Page: 27 / 206

Search results

Summary of Contents for GT01

Reviews: