Panasonic GT01 User Manual Download Page 67

Page: 67 / 206

3-5

3.1.4 UL/c-UL Qualification

Be aware of the following when applying for UL standard for the equipment that the GT has been
built in.



When the GT built in equipment, the GT should meet the standard as a part of the enclosure.



As the rear of the GT is not qualified as an enclosure, provide a fire enclosure (metal barrier) that

entirely covers the rear and lateral sides of the GT.

3.1.5 Mounting Screws

Secure the GT to a mounting plate using the fitting and screws provided with the unit.

Recommended screws

Recommended product

GT unit

Size

Others

Quantity

Mounting screw

GT01/GT11

– 20

Material: SW pane-head (+)
Galvanization,
trivalent chromate

4 pcs/unit

GT05/GT21/GT32/
GT32-R/GT32-E

– 25

GT02/GT02L/GT03-E/GT12 dedicated screw

The GT02/GT02L/GT03-E/GT12 dedicated screw is not sold on the open market.
Using screws other than the dedicated screw will cause failures such as decrease of water-proof
property.

Name

Content

Model No.

Attachment fitting
(with dedicated screws)

5 sets for GT02/GT02L/GT03-E/GT12
4 pcs of attachment fittings and 4 pcs of dedicated
screws/set

AIG12830

Summary of Contents for GT01















































































































































































































Search results

Summary of Contents for GT01

Reviews:

Related manuals for GT01

Brands by name

Popular brands

Panasonic GT01, User Manual

Search results

Summary of Contents for GT01

Reviews:

Related manuals for GT01

Brands by name

Popular brands