manualshive.com logo in svg

Panasonic GM1 Series, User Manual

Share
Download
Panasonic GM1 Series User Manual Download Page 644

Warranty

Warranty Period

Warranty period shall be 12 months from the ex-factory date or 18 months from the date of

manufacturing.
This Warranty shall be exempted in the following cases,
1. Defects resulting from misuse and/or repair or modification by the customer.
2. Defects resulting from drop of the Product or damage during transportation.
3. Defects resulting from improper usage of the Product beyond the Specifications.
4. Defects resulting from fire, earthquake, lightening, flood, damage from salt, abnormal

voltage or other Act of God, or other disaster.

5. Defects resulting from the intrusion of foreign material to the Product, such as water, oil or

metallic particles.
Parts exceeding their standard lifetime specified in this document are excluded.

Warranty Scope

Panasonic warrants the replacement of the defected parts of the Product or repair of them

when the defects of the Product occur during the Warranty Period, and when the defects are

under Panasonic responsibility.This Warranty only covers the Product itself and does not cover

any damage incurred by such defects.
Panasonic in accordance with 'Warranty Period' records,in any case,the machine state is

poor,and cause damage to your company and the third party,all liability,Panasonic is not

responsible.
1. The machines are not assembled in accordance with the instructions or precautions noted

in this specification.

2. When the machine does not match the product assembled in the machine.
3. This specification does not depend on your company.
4. When the machine condition is not caused by Panasonic reasons.

Warranty

App-2

WUME-GM1RTXOP-01

Summary of Contents for GM1 Series











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands