manualshive.com logo in svg

Panasonic GM1 Series, User Manual

Share
Download
Panasonic GM1 Series User Manual Download Page 41

Item

Function

Bookmarks

Allows the cursor to move to bookmarked locations.
Used to browse the positions where the declaration part of a defined
variable is referenced or used.

Item

Function

Toggle Bookmark

Saves the position selected in the active
editor as a bookmark.

Next Bookmark
(active editor)

Moves to the previous bookmark in the active
editor.

Previous
Bookmark (active
editor)

Moves to the next bookmark in the active
editor.

Clear All
Bookmarks (active
editor)

Removes all bookmarks in the active editor.

Input Assistant

Allows the user to select variables, function blocks, operators,
types, or other data that can be inserted in the cursor position from
a category and insert them in the cursor position.

Function Block Guidance

Invokes the Function Block Guidance.

Auto Declare

Opens the Auto Declare dialog box to support variable declaration.

Next Message

Selects the next message in the message view.

Previous Message

Selects the previous message in the message view.

Go To Source Position

Moves to the position of the source code applicable to the message
selected in the message view.

Refactoring

Displays the positions where the changed variable name is used
and allows changes to be made collectively.

View

Item

Function

Devices

Displays the device view.

POUs

Displays the POU view.

Messages

Displays the message window.

Element properties

Displays element properties.

ToolBox

Displays the toolbox.

Watch

Displays the watch window.

Item

Function

Watch 1 to Watch
4

Displays a list of user-defined variables for
the purpose of value monitoring.

Watch all Forces

Displays a list of value-forced variables.

Cross Reference List

Displays the cross reference list window.

Call Tree

Displays the call tree window.

Bookmarks

Displays the bookmark window.

3.4 Component Names

WUME-GM1RTXOP-01

3-13

Summary of Contents for GM1 Series











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands