Panasonic GM1 Series, User Manual

Page: 435 / 650

N10: Absolute coordinate specification is set.
N20: Linear interpolation is performed according to the following values.
Current value (X0, Y0), end point (X50, Y50)
Acceleration 1 [u/sec
2
], deceleration -1 [u/sec
2
]
N30: Linear interpolation is performed according to the following values.
Current value (X50, Y50), end point (X100, Y50)
Acceleration 1 [u/sec
2
], deceleration -1 [u/sec
2
]
Relative coordinate specification (G91)
In relative coordinate specification, the current value is used as the base and a movement
distance from the current value is specified as relative coordinates.
To use relative coordinate specification, specify G91. Note that if G91 is not specified, absolute
coordinate specification will be used.
G-code Function Description Remarks
G91 Relative coordinate
specification Specifies target coordinates as
relative coordinates After G91 is set, relative coordinate
specification remains effective until
G90 is set.
■
Relative coordinate specification setting example (operation settings)
[Setting example]
G-code setting example:
N10 G91
N20 G01 X50 Y50 F100 E1 E-1
N30 G01 X50 Y0 F100 E1 E-1
● Explanation of G-code
N10: Relative coordinate specification is set.
N20: Linear interpolation is performed according to the following values.
Current value (X0, Y0), end point (X+50, Y+50)
Acceleration 1 [u/sec
2
], deceleration -1 [u/sec
2
]
11.5 Multi-axis Operation
WUME-GM1RTXOP-01 11-73