manualshive.com logo in svg

Panasonic GM1 Series, User Manual

Share
Download
Panasonic GM1 Series User Manual Download Page 559

Item

Description

Baud rate

Can be selected from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200

Parity

Can be selected from EVEN, ODD, and NONE

Data bits

Data bit length between start bit and stop bit
Settable value: 7 bits and 8 bits (Settable: 0 to 255)
The default value of Modbus is 8 bits.

Stop bit

Settable value: 1 bit and 2 bits
The default value of Modbus is 1 bit.

8.

Double-click "Modbus Master, COM Port" in the navigator pane.
The "Modbus_Master_COM_Port" object will be displayed.
Select the "General" tab and set appropriate values for each item.

Item

Description

Transmission mode

RTU: Binary transmission
ASCII: ASCII code transmission (Not supported)

Response timeout [ms]
[0..65535]

Waiting time for response from slave
* If a response timeout period is set in the slave device, the settings in the
slave device will take effect.

Time between frames [ms]
[0..65535]

Time period during which master transmission is paused from when the last
response is received until the next command is sent

Auto-restart
communication

When the check box is selected: After a communication error occurs, the
communication status is automatically checked. When the communication is
restored, reconnection is performed.
When the check box is not selected: After a communication error occurs,
reconnection is not performed.

"ModbusGenericSerialMaster I/O Mapping" tab: Select a bus cycle task that performs

Modbus communication.

9.

Double-click "Modbus Slave, COM Port" in the navigator pane.
The "Modbus_Slave_COM_Port" object will be displayed.

13.3 MODBUS

WUME-GM1RTXOP-01

13-33

Summary of Contents for GM1 Series











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands