manualshive.com logo in svg

Panasonic GM1 Series, User Manual

Share
Download
Panasonic GM1 Series User Manual Download Page 259

8.8.4 Online Change

Online change allows the user to change applications without having to stop the GM1 controller

during operation. Executing online change downloads only different applications to the GM1

controller.
If the applications generated by build during login differ from the applications within the GM1

controller, the following dialog box will be displayed.

Login with online change

Executes login by downloading only different applications without stopping the GM1 controller

Login with download

Executes login by downloading applications generated by build with the GM1 controller

stopped

Login without any change

Executes login without downloading the applications generated by build

● Do not clear the "Update bootproject" check box. If you clear the check box, the applications

will not be saved when the GM1 controller is turned OFF.

8.8.5 Code Analysis (Static Analysis Light)

Code analysis (Static Analysis Light) can be conducted on programs that are created.
Code analysis can check for the following errors.

Error number

Description

SA0033

Unused variables

SA0028

Overlapping memory areas

SA0006

Write access from several tasks

SA0004

Multiple write accesses on output

SA0027

Multiple uses of identifiers

SA0167

Report of temporary function block instance

8.8 Login / Logout

WUME-GM1RTXOP-01

8-23

Summary of Contents for GM1 Series











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands