manualshive.com logo in svg

Panasonic GM1 Series, User Manual

Share
Download
Panasonic GM1 Series User Manual Download Page 468

2.

Set up general-purpose IO parameters.
Select an IO parameter to be changed and then select a desired item from the drop-down

list.

3.

Select the "I/O Mapping" tab and set the correspondence (mapping) between the channel

and variable in the mapping setting pane.
Click the "Variable" column corresponding to the channel to be used by the program and

enter a variable name.
Clicking the mark in the "Mapping" column allows you to change the type of mapping.

● You can copy the variable name set in the Channel column.

Select a channel (CH0 or CH1) in the "Category Selection" column, right-click, and then select
[Copy] from the context-sensitive menu that is displayed. Next, select another channel, right-
click, and then select [Paste] from the context-sensitive menu that is displayed.

12.4.3 Setting Items of IO_Configuration Parameters

■

IO parameters

Setting item

Setting item

Settings

Default value

Description

General-purpose
input time constant

Input time
constant

None
0.1 ms
0.5 ms

None

Input time constant

12.4 General-purpose I/O

12-6

WUME-GM1RTXOP-01

Summary of Contents for GM1 Series











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands