Panasonic DP-MC210 Operating Instructions Manual Download Page 81

Page: 81 / 128

10. Useful Information

10.5.1 Inserting an SD card

Insert the SD card (

) with the labelled surface facing

upward into the SD card slot (

10.5.2 Removing an SD card

Push the SD card in (

Pull the SD card (

) straight out.

File folder in an SD card

When you save files into the SD card, the following folder
is made on the SD card.

SD:/PRIVATE/MEIGROUP/PCC/MFP/IMAGE/XXXXXX

(“XXXXXX” will vary depending on the unit.)

Note:

Do not delete or change the folder name on your
computer.

If you use the SD card with 2 or more units at the
same time, a different folder is made on the SD card
for each unit. To view data that was saved using a
different unit, you need to select the folder that was
created by the different unit.

Summary of Contents for DP-MC210

































































































































Search results

Summary of Contents for DP-MC210

Reviews:

Related manuals for DP-MC210

Brands by name

Popular brands

Panasonic DP-MC210, Operating Instructions Manual

Search results

Summary of Contents for DP-MC210

Reviews:

Related manuals for DP-MC210

Brands by name

Popular brands