![background image](http://html.mh-extra.com/html/panasonic/dp-cl21m/dp-cl21m_user-manual_275188076.webp)
Using the HDD Maintenance Mode
Macintosh
Windows
Basics
Basics
76
The HDD Maintenance mode has the following functions,
• Displaying information of the printer’s hard disk drive,
- Volume Label
- Total Size
- Free Size
• Checking the printer’s hard disk drive.
• Formatting the printer’s hard disk drive.
- Quick Format:
Bad sectors are not checked.
- HDD Format (Physical Format):
It will take more time than the Quick Format because bad sectors are checked.
To use the HDD Maintenance mode,
1
Turn on the printer by pressing
MENU/EXIT (PAUSE)
button and
(CONTINUE)
button until “Initializing...” is displayed.
2
Press
MENU/EXIT (PAUSE)
button.
HDD Information is displayed.
3
Press
(CONTINUE)
or
(CANCEL)
button until the desired menu is
displayed.
4
Press
ENTER
button to enter the item menu.
5
Press
(CONTINUE)
or
(CANCEL)
button until the desired item is displayed.
6
Press
ENTER
button.
7
Select the desired lower-level menu using
(CONTINUE)
or
(CANCEL)
button, and
ENTER
button.
• If you have entered the selection 2 menu, then perform the above procedure once again.
8
To exit the HDD Maintenance mode, press
MENU/EXIT (PAUSE)
button.
9
If you need to change a different menu, repeat the steps 2-8 above.
10
To quit the HDD Maintenance mode, turn off the printer.
Using the HDD Maintenance Mode