Adjusting the Color Density (Color Calibration)
Macintosh
Windows
Basics
Basics
66
1
Repeat steps 1 through 3 on
page 63
.
2
Press
ENTER
button.
3
Press
(CONTINUE)
or
(CANCEL
) button to darken/lighten all the colors to
match with the colors of the Color Calibration Card.
To make the color density setting of the Color Calibration Test Print Page darker or lighter by 1
level, increase or decrease a value of the Calibration Offset by 1 by pressing
(CONTINUE)
or
(CANCEL)
button.
For example, when Calibration Offset is 0:
• If you wish to make the density setting
darker by 1 leve
l: Select
1
by pressing
(CONTINUE)
button once.
• If you wish to make the density setting
lighter by 1 level
: Select
-1
by pressing
(CANCEL)
button once.
4
Press
ENTER
button.
5
Press
(CONTINUE)
or
(CANCEL
) button until
Calib. Test Prn.
menu is
displayed.
6
Press
ENTER
button to reprint the Color Calibration Test Print Page.
• The line enclosure and Gray Balance reflects the changes made to the settings.
• If you are not satisfied with the current color density settings, repeat the above steps.
Adjusting the Density for All Colors Simultaneously
Color Calibration
Calibration Offset
Calibration Offset
0* (-5 to 5)
Color Calibration
CYAN
Color Calibration
Calib. Test Prn.
