Network Firmware Update Tool (LAN)
Page 14
9.
Confirm the destination device(s) again.
Set timer communication if necessary.
Then click [Next>].
10.
Data is transferred to the Spooler and the
update is started.
The Spooler window appears automatically
showing the progress of the data transfer.
The spooler will take time to open depending
on the number of addresses to update.
11.
When the transfers are completed, all jobs in
the spooler disappear and the communication
log is displayed.
Click [Finish] to close the tool.
After each firmware code is successfully
programmed to the Firmware Flash Memory in
the unit, the unit reboots and restarts again
automatically.
Summary of Contents for DP-180/190
