159
UF-9000
JAN 2004
Ver. 1.0
DP-180/190
5.2.
Service Modes (For Facsimile)
5.2.1.
Fax Service Mode Procedure
1. To select the Service Mode
The service mode is selected when “FUNCTION”, “ORIGINAL SIZE” and “3” keys are sequentially
pressed, then F1 will appear in the display.
Press "9" and "START" keys to enter F9 Mode: Unit Maintenance.
Press “V”, ”/\” arrow keys to select "00 FAX FUNC.PARA" and press “START” to enter Facsimile
Service Mode.
2. To exit the Service Mode
The service mode is reset when the “FUNCTION” and “CLEAR” keys are pressed simultaneously.
Note:
The following buttons provide these functions in the Service Mode:
5.2.2.
Fax Parameters (Function Parameter Setting)
Use the following procedure to change the function parameters.
Enter the desired code number and press “START” key.
↓
If you wish to select another code number, scroll the menu with the “V”, ”/\” arrow keys.
↓
Select the desired function code and press the "START" key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys simultaneously to exit the service mode.
"START":
: The new setting value is stored in the machine.
"V”
: Scroll the function parameter number down.
"/\ “
: Scroll the function parameter number up.
Function Parameter Table
No.
Parameter
Selections
Function
000 Monitor/Tel Dial
1 = Monitor
2 = Tel/Dial
Selects whether the machine starts to TX
automatically during On-Hook dialing.
Monitor
: Start to TX after pressing START
TEL/DIAL
: Start to TX automatically
001 Alarm Status
1 = Off
2 = Timer
3 = Constant
Selects the No Paper or No Toner alarm status.
OFF
: Alarm is disabled.
Timer
: Alarm will shut off after 6 seconds.
Constant
: Alarm will not stop until "STOP" is
pressed or the error is cleared/
corrected.
002 Stop Comm.
JRNL
1 = Off
2 = On
Selects whether the machine prompts to print the
COMM. Journal when the printout condition is set to
INC and STOP is pressed during communication.
Summary of Contents for DP-180/190
