manualshive.com logo in svg

Panasonic DP-180/190, Service Manual

The Panasonic DP-180/190 is a versatile and efficient device designed to cater to all your printing needs. To ensure seamless operation and maintenance, it comes with a comprehensive Service Manual available for free download on our website. Explore the manual and optimize the performance of your Panasonic DP-180/190 at your convenience.

Share
Download
background image

195

UF-9000

JAN 2004

Ver. 1.0

DP180/190

B. Copying the Firmware from an Existing Machine using a Flash Memory Card (4 MB or 8 MB)

1. Turn the Power Switch on the left side of the machine to the OFF position. (During a Lightning 

Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC 
Power Cord.)

2. Install a Flash Memory Card (4 MB or 8 MB) into the machine.
3. Turn the Power Switch on the Left Side of the machine to the ON position.
4. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
5. Perform the Copy Service Mode F9-08 (Program Backup).
6. The firmware is copied into the Flash Memory Card.
7. After the backup is completed, press "STOP" first and then press "FUNCTION" + "CLEAR" keys 

simultaneously to return to standby.

8. Turn the Power Switch on the left side of the machine to the OFF position.
9. Remove the Master Firmware Card that you just created from the machine.

10. Turn the Power Switch on the Left Side of the machine to the ON position.

11. Use this Master Firmware Card to update the firmware on other machines.

3.2. Erasing the Master Firmware Card

1. Turn the Power Switch on the left side of the machine to the OFF position. (During a Lightning 

Storm, to prevent electrocution disconnect the Telephone Line Cable first before unplugging the AC 
Power Cord.)

2. Install the Master Firmware Card into the machine.
3. Turn the Power Switch on the Left Side of the machine to the ON position.
4. Press “FUNCTION”, “ORIGINAL SIZE” keys and then Key “3” on the keypad sequentially.
5. Perform the Service Mode F9-09 (Update Program Card).
6. After the Flash Memory Card is erased, machine prompts “READY TO PROGRAM PRESS SET TO 

START”. Press “STOP”.

7. Press "STOP" first and then press "FUNCTION" + "CLEAR" keys simultaneously to return to 

standby.

8. Turn the Power Switch on the left side of the machine to the OFF position.
9. Remove the blank Flash Memory Card from the machine.

10. Repeat from Step 2 above if you are erasing another Master Firmware Card.

Summary of Contents for DP-180/190









































































































































































































































































































Reviews:

No comments

Related manuals for DP-180/190

Canon MX490 Series Setup Manual preview
MX490 Series
Brand: Canon Pages: 11
Canon MX490 Series Quick Help Manual preview
MX490 Series
Brand: Canon Pages: 2
Canon Photura 135 Review preview
Photura 135
Brand: Canon Pages: 12
Canon PIXMA Pro9000 Mark II Series Release Note preview
PIXMA Pro9000 Mark II Series
Brand: Canon Pages: 4
EASYPRINT Compact CM User Documentation preview
Compact CM
Brand: EASYPRINT Pages: 37
Tally T6090 Maintenace Manual preview
T6090
Brand: Tally Pages: 202
Oki C610cdn Brochure & Specs preview
C610cdn
Brand: Oki Pages: 4
Canon Pixma TS7700i Series Manual preview
Pixma TS7700i Series
Brand: Canon Pages: 554
Konica Minolta Bizhub 222 Service Manual preview
Bizhub 222
Brand: Konica Minolta Pages: 846
Star mC-Print3 MCP31LB How To Connect preview
mC-Print3 MCP31LB
Brand: Star Pages: 12
ABLE Systems Ap890 User Manual preview
Ap890
Brand: ABLE Systems Pages: 12
Citizen CT-D101 User Manual preview
CT-D101
Brand: Citizen Pages: 57
Xerox WorkCentre XD130DF Specification Sheet preview
WorkCentre XD130DF
Brand: Xerox Pages: 1
U-Line Zebra QLN320 Manual preview
Zebra QLN320
Brand: U-Line Pages: 30
Unytouch UPI3FL-80mm User Manual preview
UPI3FL-80mm
Brand: Unytouch Pages: 12
TVS electronics MINI THERMAL RP-3180 User Manual preview
MINI THERMAL RP-3180
Brand: TVS electronics Pages: 19
Copystar CS 4550c Speci?Cations preview
CS 4550c
Brand: Copystar Pages: 4
Canon C1533P Setup Manual preview
C1533P
Brand: Canon Pages: 120

Brands by name

Popular brands

Load more brands