Panasonic DP-180/190, Service Manual, Page: 272 / 296

Network Firmware Update Tool (LAN)
Page 6
3. Preparing the Firmware Update
3.1 Preparing the Unit to Accept the Firmware Code
3.1.1 For DP-180/190, DP-2310/3010, DP-3510/4510/6010, DP-3520/4520/6020, UF-9000
1.
If the device password is changed (Key Operator Password) from the default value (0000), it is not
possible to program the firmware code. In this case, enter the password in advance to the Default
Password in the Configuration dialog box or enter the password at each communication.
2.
Make sure the device is not in an operating condition (copying or printing etc...).
Note: It is recommended to update the firmware at night due to lower activity of the device.
3.1.2 For DX-600 / DX-800 (v1.31 or higher)
1. If the device password is changed (Remote Password) from the default value blank, it is not
possible to program the firmware code. In this case, enter the password in advance to the Default
Password in the Configuration dialog box or enter the password at each communication.
2. Make sure the device is not in an operating condition (copying or printing etc...).
Note: It is recommended to update the firmware at night due to lower activity of the device.
3.2 Preparing the Firmware Code
Copy the firmware Code file(s) to the following folder.
C:\Panasonic\Panasonic-FUP\Data
Note:
The Archive File extracts the Firmware Code Files automatically into the designated folder.
(ex. DP-2310_PU_030327.exe)