![Panasonic DMR-EH55S Operating Instructions Manual Download Page 18](http://html1.mh-extra.com/html/panasonic/dmr-eh55s/dmr-eh55s_operating-instructions-manual_3580937018.webp)
18
RQT8365
STEP
1
Connection
Use one of the following connections to suit the antenna lead to the unit’s RF IN terminal, and the 75
≠
coaxial cable to the antenna terminals on
the equipment (television etc.). Refer to other equipment’s operating instructions.
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
These terminals can be used for either interlace or progressive output
(
➡
77) and provide a purer picture than the S VIDEO OUT terminal.
Connect to terminals of the same color.
∫
Connection to a stereo amplifier
∫
Connecting an amplifier with a digital input terminal
If the antenna connectors don’t match
Type
This unit
Other equipment (television etc.)
A twin lead
A twin lead
and a coaxial
plug
Two twin
leads
300–75
≠
transformer
from the antenna
(Flat) Twin lead
300
≠
cable
To this unit’s RF IN
terminal
75
≠
coaxial
cable
75–300
≠
transformer
Television
VHF or
UHF
from the antenna
(Flat) Twin lead 300
≠
cable
To this unit’s RF IN
terminal
VHF/UHF band mixer
(Round)75
≠
coaxial cable
VHF/UHF band separator
Television
75
≠
coaxial
cable
VHF
UHF
from the antenna
To this unit’s RF
IN terminal
300–75
≠
transformer
(Flat) Twin lead
300
≠
cable
VHF/UHF band mixer
75
≠
coaxial
cable
VHF/UHF band separator
Television
VHF
UHF
To enjoy even higher picture quality
Connecting to the S VIDEO IN terminal
AUDIO IN
R L
S VIDEO IN
COMPONENT
VIDEO OUT
P
R
Y
P
B
IN1
IN3
V
R-AUDIO-L
VIDEO
R-AUDIO-L
S VIDEO
RF
OUT
RF
IN
VHF/UHF
OUT2
OUT1
This unit
Television
Audio/Video
cable
S Video cable
Red White
Red White
Connecting to the COMPONENT VIDEO IN terminals
COMPONENT
VIDEO IN
AUDIO IN
R L
COMPONENT
VIDEO OUT
P
R
Y
P
B
IN1
IN3
VID
R-AUDIO-L
VIDEO
R-AUDIO-L
S VIDEO
RF
OUT
RF
IN
VHF/UHF
OUT2
OUT1
This unit
Television
Audio/Video
cable
Component
video cable
Red White
Red White
Connecting an amplifier or system component
VIDEO
R-AUDIO-L
S V
RF
OUT
RF
IN
VHF/UHF
OUT2
OUT1
AV OUT
O
DIGITAL AUDIO OUT
(
PCM/BITSTREAM
)
G-LINK
OPTICAL
OPTICAL IN
AUDIO IN
R L
Insert fully, with
this side facing
up.
Audio cable
≥
To enjoy multi-channel surround sound DVD-Video, connect an amplifier
with a built-in decoder displaying the logo marks below using an optical
digital audio cable and change the settings in “Digital Audio Output” (
➡
62).
≥
When this unit is connected to an amplifier with an optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
“HDMI Audio Output” to “Off” in the Setup menu (
➡
63). In this
case audio is only output from the amplifier not the television.
≥
Before purchasing an optical digital audio cable, check the
terminal shape of the equipment to be connected.
≥
You cannot use DTS Digital Surround decoders not suited to DVD.
≥
Even if using this connection method, output will be in only 2
channels when playing DVD-Audio.
Amplifier’s rear panel
Amplifier’s rear panel
To OUT 1 or OUT 2
This unit
This unit
Optical digital audio cable
Do not bend sharply when connecting.
Red White
Red White
EH55English.book Page 18 Thursday, April 6, 2006 9:28 PM