Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 81 / 406

SQW0550

Basics

Using the [Setup] menu

For details on how to select the [Setup] menu settings, refer to

(→

)

[Economy]

Turn off the camera or make the monitor go dark while not using the camera or if no

operation is performed for a preset period of time to minimise battery consumption.

■

TZ100/TZ101

[Sleep Mode]

The camera is automatically turned off if the camera has not been used for the time

selected on the setting.

Settings: [10MIN.] / [5 MIN.] / [2 MIN.] / [1 MIN.] / [OFF]

•

To restore → Press the shutter button halfway, or turn the camera [

ON/OFF] switch to

[OFF] and then turn it [ON] again

■

TZ80/TZ81

[Auto Power Off]

The camera is automatically turned off if the camera has not been used for the time

selected on the setting.

Settings: [10MIN.] / [5 MIN.] / [2 MIN.] / [1 MIN.] / [OFF]

•

To restore → Press the Camera [

ON/OFF] button

■

[Auto LVF/Monitor Off]

The monitor is automatically turned off if the camera has not been used for the time

selected on the setting.

Settings: [5 MIN.] / [2 MIN.] / [1 MIN.]

•

To restore → Press any button or touch the monitor.

●

This function is not available in the following cases:

•During motion picture recording/playback

•When recording with [ ] ([4K Pre-Burst

]) of the 4K Photo function

•

TZ100/TZ101

When [Multi Exp.] is set

•When connected to computer/printer

•During Slide Shows

•When using [Time Lapse Shot]

•When [Auto Shooting] of [Stop Motion Animation] is set to [ON]

•

TZ100/TZ101

While the HDMI output is being used for recording

●

TZ100/TZ101

When using the AC adaptor (optional) and DC coupler (optional), the [

Sleep Mode] is disabled.

●

TZ80/TZ81

When using the AC adaptor (optional) and DC coupler (optional), the [

Auto Power Off] is disabled.

●

When using the AC adaptor (optional) and DC coupler (optional), [

Auto LVF/Monitor Off] is fixed to

[5 MIN.].

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands