Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 143 / 406

143

SQW0550

Picture Quality and colouring Settings

Using the picture correction functions effectively

Combining still pictures with different exposures ([HDR])

Recording mode:

The camera can combine 3 still pictures taken at different exposures into a single

properly exposed picture with rich gradation. The individual pictures used to create the

HDR picture are not saved. You can minimise the loss of gradations in bright areas and

dark areas when, for example, the contrast between the background and the subject is

large.

A combined HDR picture is saved in JPEG format.

→

[Rec

] → [

HDR]

[ON]

Creates a combined HDR picture.

[OFF]

Does not create a combined HDR picture.

[SET]

[Dynamic

Range]

[AUTO]:

Takes pictures after automatically setting the adjustment range

of the exposure based on the contrast of a subject.

[±1EV] / [±2EV] / [±3EV]:

Takes pictures using the adjustment range of

the exposure being set.

[Auto Align]

[ON]:

Automatically adjusts the displacement of pictures caused by

jitter, etc. We recommend using this setting to take pictures with a

handheld camera.

[OFF]:

Does not adjust the displacement of pictures. We recommend

using this setting when you use a tripod.

TZ100/TZ101

●

After the shutter button has been pressed, do not move the camera during the burst operation.

●

Since a burst of still pictures are combined after they have been recorded, it will be a few

moments before you will be able to record another picture.

●

A subject that was in motion when it was recorded may be recorded as an afterimage.

●

TZ100/TZ101

When [Auto Align] is set to [ON], the angle of view narrows slightly.

●

When you take pictures using a flash, the flash mode is fixed to [

] (Forced Flash Off).

●

This function will not work for still pictures while motion pictures are being recorded.

●

This function is not available in the following cases:

•When using [Burst]

•When recording 4K photos

•When using [Auto Bracket]

•

TZ100/TZ101

During T (Time) recording

•When recording using [Post Focus]

•When [Quality] is set to [

], [

] or [ ]

•When using [Time Lapse Shot]

•When [Auto Shooting] of [Stop Motion Animation] is set to [ON]

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands