Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 33 / 406

SQW0550

Preparations

Charging battery

■

Recording motion pictures (When using monitor)

TZ100/TZ101

[Rec Format]

[AVCHD]

[MP4]

[Rec Quality]

[FHD/17M/50i]

[FHD/28M/50p]

[4K/100M/25p]

Available recording time

Approx. 105 min.

Approx. 100 min.

Approx. 90 min.

Actual available recording time

Approx. 50 min.

Approx. 45 min.

TZ80/TZ81

[Rec Format]

[AVCHD]

[MP4]

[Rec Quality]

[FHD/17M/50i]

[FHD/28M/50p]

[4K/100M/25p]

Available recording time

Approx. 110 min.

Approx. 90 min.

Actual available recording time

Approx. 55 min.

Approx. 45 min.

The time you can actually record when repeatedly turning the camera on and off, starting and

stopping recording and using zoom.

Recording conditions

•

Temperature 23 °C (73.4 °F), humidity 50%RH

•[AVCHD] motion pictures:

Recording stops when the continuous recording time exceeds 29 minutes and 59 seconds.

•Motion pictures with their file size set to [FHD], [HD] or [VGA] in [MP4]:

Recording stops when the continuous recording time exceeds 29 minutes and 59 seconds or the file

size exceeds 4 GB.

– Since the file size becomes larger with [FHD], recording with [FHD] will stop before 29 minutes

59 seconds.

•MP4 motion pictures with a [Rec Quality] size of [4K]:

Recording stops when the continuous recording time exceeds 15 minutes.

When you are using an SDHC memory card, you can continue recording without interruption even if

the file exceeds 4 GB, but the motion picture file will be recorded and played back in separate files.

If using an SDXC Memory Card, you can record a motion picture in a single file even if the size is

greater than 4 GB.

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands