Panasonic DMC-TZ100 Operating Instructions Manual Download

Page: 133 / 406

133

SQW0550

Picture Quality and colouring Settings

TZ100/TZ101

Adjusting highlights and shadows

[Highlight Shadow]

Recording mode:

You can adjust the highlights and shadows in a picture while confirming the brightness of

these areas on the screen.

Set the menu

→

[Rec

] → [

Highlight Shadow]

Press to select the item

([Standard])

No adjustments.

([Higher contrast])

Makes the highlighted areas brighter and shadowed areas

darker.

([Lower contrast])

Makes the highlighted areas darker and shadowed areas

brighter.

([Brighten shadows])

Makes the shadowed areas brighter.

/ / (Custom)

You can set a custom registration shape.

Rotate the control ring to adjust the

brightness of the highlighted areas

and rotate the rear dial to adjust the

brightness of the shadowed areas

•To register your preferred settings, press to select

the registration target icon (Custom 1, Custom 2, and

Custom 3).

•Adjustments can also be made by dragging the graph.

Highlighted area

Shadowed area

Preview display

Press [MENU/SET]

●

You can press the [DISP.] button on the brightness adjustment screen to switch the screen display.

●

The settings registered in [ ], [ ], or [ ] will be retained even if the camera is turned off.

●

The settings adjusted in [ ], [ ], [ ], or [ ] will be restored to the default settings when the

camera is turned off.

Summary of Contents for DMC-TZ100























































































































































































































































































































































































































Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands

Panasonic DMC-TZ100, Operating Instructions Manual

Search results

Summary of Contents for DMC-TZ100

Reviews:

Related manuals for DMC-TZ100

Brands by name

Popular brands