140
SQW0550
Picture Quality and colouring Settings
Setting the picture quality and size
Setting the compression rate of pictures ([Quality])
Recording mode:
Set the compression rate used for storing pictures.
→
[Rec
] → [
Quality]
Settings
File format
Description
[ ]
JPEG
Gives priority to picture quality and saves pictures in JPEG file
format.
[ ]
Saves pictures in JPEG file format using standard picture quality.
This setting is useful when you want to increase the number of
recordable pictures without changing the number of pixels.
[
]
RAW + JPEG
Saves pictures in JPEG file format ([ ] or [
]) in addition to the
RAW file format.
*
1
[
]
[ ]
RAW
Saves pictures in the RAW file format.
*
2
[ ] images are recorded with a smaller data volume than [
] or
[
].
*
1
If you delete a RAW file from the camera, the corresponding JPEG file is also deleted.
*
2
Regardless of the aspect ratio of the picture during recording, a RAW still picture is always
recorded at the following aspect ratio.
TZ100/TZ101
: [3:2
] (5472×3648)
TZ80/TZ81
: [4:3
] (4896×3672)
About RAW file
In RAW file format the data is saved without any picture processing by the camera. To
play back and edit RAW file pictures, you must use this unit or dedicated software.
You can perform advanced editing of RAW file pictures, such as correcting the White
Balance of pictures recorded previously, and save the pictures in file formats that can be
displayed on a PC. This format delivers a higher picture quality than the JPEG format, but
the amount of data is greater.
•
TZ100/TZ101
You can develop the RAW file pictures using [RAW Processing] in the [Playback] menu.
(→
•To develop and edit RAW file pictures on a PC, use the software (Ichikawa Soft
Laboratory’s “SILKYPIX Developer Studio”). To get this software, download it from the
supplier’s website and install it on your PC.
)
