ENGLISH
–
91
Special Featur
es
How to use network function
Network standby
When the projector is in a standby state, you can
control the power of the projector from a computer
connected via a wired LAN.
Press
▲▼
to select “NETWORK
1.
STANDBY”.
NETWORK
NETWORK STANDBY
NETWORK SETUP
OFF
Press
◄►
to switch “NETWORK
2.
STANDBY”.
The setting will change as follows each time
•
◄►
is pressed.
OFF
ON
ON:
•
Enables the network standby function.
OFF:
•
Disables the network standby function.
Initial setting of network
function
Make the initial network function settings before using
the network functions.
Press
▲▼
to select “NETWORK
1.
SETUP”.
NETWORK STANDBY
NETWORK SETUP
NETWORK CONTROL
OFF
Press ENTER.
2.
The “NETWORK SETUP” screen will be
•
displayed.
NETWORK SETUP
HOST NAME
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
STORE
PROJECTOR
OFF
192. 168. 0. 8
255. 255. 255. 0
192. 168. 0. 1
Press
▲▼
to select items, and
3.
press ENTER to change the
setting.
HOST NAME (Display of host name and
•
setting) :
Make alteration when to use the DHCP server.
▲▼◄►
ENTER
DEFAULT
MENU
This allows you to use network functions.
MENU
Press to display the MAIN
MENU screen.
Press to select
“NETWORK”.
Press to display the
“NETWORK” menu.
ENTER
MAIN MENU
PICTURE
POSITION
ADVANCED
MENU
DISPLAY
LANGUAGE
DISPLAY
OPTION
PROJECTOR
SETUP
P IN P
TEST
PATTERN
SIGNAL
LIST
SECURITY
NETWORK
MENU
SELECT
SUB MENU
