90
–
ENGLISH
Setting the security (continued)
Control device setup
Control from the remote control and main unit
controls can be restricted.
Press
▲▼
to select “CONTROL
1.
DEVICE SETUP”.
DISPLAY SETTING
TEXT CHANGE
CONTROL DEVICE SETUP
OFF
Press ENTER.
2.
The “CONTROL DEVICE SETUP” screen will be
•
displayed.
CONTROL DEVICE SETUP
CONTROL PANEL
REMOTE CONTROLLER
Press
▲▼
to select “CONTROL
3.
PANEL” or “REMOTE
CONTROLLER”.
CONTROL PANEL:
•
Restriction of control from the main unit
controls can be set.
ENABLE:
•
Enables control from the main unit controls.
DISABLE:
•
Disables control from the main unit controls.
REMOTE CONTROLLER:
•
Restriction of control from the remote control
can be set.
ENABLE:
•
Enables control from the remote control.
DISABLE:
•
Disables control from the remote control.
Press ENTER.
4.
The “CONTROL PANEL” or “REMOTE
•
CONTROLLER” screen will be displayed.
CONTROL PANEL
C
ENABLE
DISABLE
Press
▲▼
to select “ENABLE”
5.
or “DISABLE”, and then press
ENTER.
A confirmation screen will appear.
•
ENTER
SURE?
CHANGE
EXECUTE
EXECUTE
CANCEL
Press
◄►
to select “EXECUTE”,
6.
and then press ENTER.
Note
If a setting is reflected, the on-screen menu
•
disappears. To continue operation, press the MENU
button to display the main menu.
If an attempt is made to control the projector from
•
the remote control or main unit controls when
“ENABLE” is set, the security password screen
appears. To change a setting, enter the security
password and change the operation setting. The
security password screen disappears if the MENU
button is pressed or no operation is performed for
10 seconds.
