Using vinyl tape to wrap the indoor unit connecting portion.
When connecting the drain hose, keep the outlet port above
the ground. ( Do not dip it into water and fix it onto wall to
prevent swinging in wind.)
1.Wrap the piping, drain hose and connecting cable with tape
upwardly.
2.Secure the piping with clamps onto the wall.
Apply putty or caulking material to the wall opening to
prevent rain from entering into the air conditioner,
otherwise, cooling efficiency may be affected or water
dripping may be resulted.
1.Wrap the piping and the connecting cable with tape
upwardly.
2.Secure the piping onto the wall and bend the piping to
prevent rain from entering into room. (Ensure the lowest
part of the piping is lower than the wall opening to prevent
rain entering) (Fig 23).
3.Secure the piping with clamps and seal the wall opening.
Apply caulking compound
to seal aperture to prevent
water entering into the unit.
1.Operate the unit at cooling operation mode for fifteen
minutes or more.
2.Meassure the temperature of the intake and discharge air.
3.Ensure the difference between the intake temperature and
the discharge temperature is more than 8 .
℃
29
Fig 23
Fig 24
10.6.
Wrapping the Piping
10.7.Evaluation of the Performance
10.6.1.
When the indoor unit is above
outdoor unit
10.6.2.
When the outdoor unit is above
indoor unit
Note:
Fig 22
Connecting Portion
CS-C45FFH / CU-C45FFH
Drain Hose
Cable
Piping
saddle
Air outlet vent
Thermometer
Air inlet vent
Summary of Contents for CS-C45FFH
