Panasonic CF-Y2 Series Page 5 Reference Manual Download

Page: 5 / 127

Key Combinations

Display change

(When the external display is connected)
By pressing this key combination, you can select
either an external display, internal LCD or
simultaneous. (

page 77

)

CAUTION

Do not press another key until the display
destination has been completely switched.

Do not press this key combination in the
following conditions.
• When a video such as a DVD video or an

MPEG file is playing.

• When the Extended Desktop is being

utilized.

• When a game such as pinball is

displayed.

NOTE

This key combination does not work when
[Command Prompt] is set to "Full Screen".

When switching to a different user with the
Fast User Switching function, this key
operation may not work. In this case, log off
all users and restart the computer.

Simultaneous display cannot be used until
Windows startup is complete (during Setup
Utility, Windows logon screen, etc.). When

is pressed, the screen is displayed

on the external display or internal LCD.

Key

Functions

Popup Window

(Displayed after logging

on to Windows)

Summary of Contents for CF-Y2 Series
































































































































Search results

Summary of Contents for CF-Y2 Series

Reviews:

Related manuals for CF-Y2 Series

Brands by name

Popular brands

Panasonic CF-Y2 Series, Reference Manual

Search results

Summary of Contents for CF-Y2 Series

Reviews:

Related manuals for CF-Y2 Series

Brands by name

Popular brands