20
Standby/Hibernation Functions
C
Add the check mark for [Prompt for password when computer resumes from
standby] in [start] - [Control Panel] - [Performance and Maintenance] - [Power
Options] - [Advanced].
z
Do not enter either the standby or hibernation mode under the following conditions. You
may corrupt your data or file, the standby or hibernation function may not work, or the
computer (or peripherals) may fail to work properly.
• <CF-Y2 series>
While the hard disk drive indicator
or SD memory card indicator
is on, or while the
DVD-ROM & CD-R/RW drive indicator
is blinking.
<CF-W2 series>
While the hard disk drive indicator , SD memory card indicator
, or DVD-ROM &
CD-R/RW drive indicator
is on.
• When playing/recording audio files and displaying images (such as MPEG files).
• When playing a DVD-Video.
• When writing to a CD-R/RW disc.
• When using communications software or the network function.
• When using peripheral devices.
If these devices fail to work properly, restart the computer.
z
After resuming from hibernation mode or standby mode, the computer may not work
properly, or may not be able to connect to the network.
z
The computer cannot enter standby or hibernation mode under the following condition.
• If a disc formatted with B’s CLiP is inserted into the DVD-ROM & CD-R/RW drive (while
is displayed on the taskbar), eject the disc in advance.
When entering the standby or hibernation mode
Standby mode: until the power indicator blinks green
Hibernation mode: until the power indicator goes off
z
Avoid the following:
• Touching the keyboard, touch pad, or power switch.
• Using external mouse or other peripheral devices.
• Connecting or disconnecting the AC adaptor.
• Closing or opening the display.
<Only for CF-Y2 series>
• Sliding the drive power/open switch.
z
It may take one or two minutes to enter standby or hibernation mode.
