55
WinDVD
WinDVD is a software application for DVD playback.
Here, you will find explanations and general information on the usage precautions and how to
access the online manual.
Refer to the online manual concerning the detailed use of the software application.
(
CAUTION
z
Be sure that the DVD-ROM & CD-R/RW drive power is turned on before running
WinDVD. Even if the DVD-ROM & CD-R/RW drive status indicator is lit after running
WinDVD, the display of the Optical Disc Drive Power-Saving utility may be set to [Off],
and the drive cannot be used. (This may happen when the drive power is off while the
disc has been set). In this case, restart the computer and turn on the drive power, then
run WinDVD.
You can run WinDVD using either of the following procedures.
z
Select
on the desktop.
z
Select [start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD].
z
During WinDVD is running, do not perform the following.
• Entering the standby or hibernation mode
• Switching the display by pressing
Fn
+
F3
• <CF-Y2 series>
Turning off the DVD-ROM & CD-R/RW drive power
If performing WinDVD, shut it down, then restart the computer.
z
Do not start WinDVD while the hard disk drive indicator
is blinking immediately after
the computer was started up.
z
During video playback, do not perform the following.
• Ejecting the disc
• Using other applications or the Command Prompt
• Changing the settings of the screen properties
Running WinDVD
Usage Precautions
