Panasonic CF-Y2 Series, Reference Manual

Page: 102 / 127

102
Setup Utility
*1
This is displayed only when an SD memory card has been registered.(
Î
page 70 )
NOTE
z
When the Setup Utility is started up with the User Password;
• [Clear registered SD card], [Set Supervisor Password] and [Hard Disk Lock] will not
be displayed.
• [Password on boot], [SD Startup], [SD Setting Method], [Setup Utility Prompt], [Boot
First Menu] and [User Password Protection] will be displayed, but cannot be set.
• The User Password can be changed only when [User Password Protection] has
been set to [No Protection]. The User Password cannot be deleted.
„
Parameters
(Underline indicates settings at the time of factory shipment.)
Security Menu
Password on boot: [Enable]
SD Startup:
*1 [Enable]
SD Setting Method:
*1 [Leave Set]
X
Clear registered SD card:
*1 [Enter]
X
Set Supervisor Password: [Enter]
Setup Utility Prompt: [Enable]
Boot First Menu: [Enable]
Hard Disk Lock: [Disable]
User Password Protection: [No Protection]
X
Set User Password: [Enter]
Password on boot Disable
Enable
SD Startup
*2 Disable
Enable